ICi Series DC-DC Intelligent Battery Chargers offer a four stage charging program that will ensure that batteries are charged to a maximum capacity providing long term reliable power. The chargers are based on the very successful PowerVerter range and additionally designed to detect faulty batteries and dead cells.
ICi chargers are suitable for providing auxiliary power on a wide variety of vehicles including fire, police and ambulance, as well as farming, forestry, commercial and leisure marine.
Features:
- Four stage charging program
- The first stage monitors the battery to ensure that faulty batteries are not inadvertently charged causing overheating and potential system failure
- Many of the same safety and protection features as the PowerVerters
- The charger will not allow unintentional draining of the source battery
- Reverse polarity protection
Technical specifications for ICi Series DC-DC Intelligent Battery Chargers:
Voltage | 24-32VDC / 12-16VDC |
Output voltage | 12V or 24V |
Transient voltage protection | ISO7637-2 ( International standard for 24Vdc commercial vehicles) |
Electrostatic voltage protection | Meets ISO10605, >>8kV contact, 15kV discharge |
Output noise | <50mV pk-pk (100mV on 24V units)< at continuous load. Meets CISPR25. |
Off load current (quiescent current) | <Typically <5mA unit will shut down when source battery is not being charged |
Power conversion efficiency | 85% |
Isolation | >400Vrms |
Operating humidity | Max. 95% max., non-condensing |
IP rating | IP5333 |
Operating temperature | -25°C to +30°C to meet this specification table
+30°C to +80°C de rate linearly to 0A |
Storage temperature | -25° to +100°C |
Certifications* | 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive, EN50498, ISO 7637-2, EN61204-3, CE, UKCA and E (automotive) marked |
*Approvals may vary depending on actual display configurations.
Other battery chargers in our offer can be found here.
*The product may differ from image.