USB Pole Charging Unit 12/24VDC is designed for applications where journeys are relatively short and passengers are standing for some or all of their time on the vehicle. These units are designed for installation onto vertical poles and offer a robust solution for buses, trams, trains and metro carriages. They can be installed on vehicle walls, seat backs and table tops as well as under seats.
The units are designed to be fitted directly to 35mm diameter poles and provide an easily accessible and strong charging solution.
Features:
- Quick Charge enabled
- 2A internal fuse to protect against catastrophic failure
- 9-32 VDC
- LED indicates unit operational
- Robust design allows the unit to be grabbed as part of the pole without damage
- USB connector faces downwards to protect against splashes and avoid connector damage
- EN50498 i ISO7637-2, E (Reg10) and CE certificates
Technical specifications for USB Pole Charging Unit 12/24VDC:
| Operating voltage | 9-32VDC |
| Output voltage | BC 5VDC +/- 0.2V
QC 1.2V to 9VDC |
| Output power | BC 10W
QC 12W |
| Output noise | <50mV pk-pk |
| Standby current | <1.7mA |
| Power conversion efficiency | 90% |
| Isolation | Non-isolated
>>400Vrms only between casing and terminals |
| Operating temperature | -25°C to 55°C |
| Storage temperature | -25°C to +100°C |
| Operating humidity | 95% max – non-condensing |
| Connections | Input: 6.3mm push-in flat blade connectors
Output: USB type single/double socket – tested to 10000 mating cycles |
| IP rating | IP53 |
| Certifications* | 2014/30/EU EMC, Reg10, 93/68/EEC CE, EN50498, EN55032, EN50155, EN50121-3-2, EN45545, ISO 7637-2, R118, CE, UKCA, E |
*Approvals may vary depending on actual display configurations.
Dimensions:
113 x 39 x 37 mm
Other sockets and chargers from our offer can be browsed here.
*The product may differ from image.
